Aircraft Disassembly and Storage

In general, disassembling the aircraft is the reverse of the assembly procedure. However, some details of disassembly need further explanation.

STEP	ACTION
1	Power off the IF800 Tomcat and the controller.
2	Disengage battery latch and remove both batteries.

3	Place the IF800 Tomcat case near the aircraft on a flat, level surface.

4	Fold each set of propeller blades toward the aircraft along each arm.

5	Disengage Autolock for each arm by turning the lever down.

6	Loosen the landing gear ratchet levers on both legs by rotating counter clockwise.

7	Fold the rear arms into the aircraft.

8	Fold the front arms into the aircraft.

9	Install the Arm Handles onto the aircraft.

10	Lift the aircraft by the Landing Gear Supports, invert, and return aircraft to the foam case bottom-side-up, front of the aircraft facing outward.

11	Loosen the Ratcheting Thumb Levers and depress the landing gear button and remove the Landing Gear Support. Place Landing Gear Supports into the pockets on the underside of the case lid and secure with velcro straps.

12	Return the controller to the case (antennas folded down, if applicable).