Arm and Disarm

Arming

1

Verify each item on the Preflight Checklist (see the end of this User Manual).

2

Arm the aircraft by bringing the left joystick stick down and towards the center of the hand controller (see below). The motors start spinning in an idle state.

Note: a Jeti DS-12 is shown below. These instructions also apply to the HereLinks.

Disarming

1

Position Mode: Once the aircraft has landed, hold the throttle down and to the left (see above). The propellers stop spinning.

Autonomous Mode: The aircraft automatically disarms upon landing.

Previous750 Flight ModesNextQGround Control Basics

Last updated