Pairing HereLink Radio
Should the HereLink Controller become disconnected to the Air Unit, follow the following procedure to repair them for your aircraft.
Tools required:
2mm Hex Screwdriver
Plastic, angle-tip spudger or probe tool
Flashlight
STEP | ACTION |
---|---|
1 | Locate the UPI panel on the underside of the aircraft. Remove the UPI Panel by unscrewing (4X) - M2.5 Socket Head Screws using a 2mm Hex screwdriver. |
2 | |
3 | Turn on the aircraft pressing the Power Button on the back of the aircraft. |
4 | Power on the HereLink Controller module with the power button. |
5 | Open the HereLink Settings App on the controller (green gear icon). |
6 | Navigate to the “RADIO” tab. NOTE: Once the (controller) “PAIR” button has been pressed you have 30 seconds to pair the controller with the drone. If this window is missed, re-select the “PAIR” button. |
7 | Press the “PAIR” button on the HereLink controller in the top right of the menu. |
8 | Use a nylon angle-tip probe or similar to depress and hold the “Pair/Reset” button on the HereLink Air Unit until the HereLink Controller screen says “Pairing Successful” and the “Uplink Rate” is displayed. |
Last updated