Aircraft Power

Powering On the Aircraft

1	Plug in both batteries’ XT90 connectors into the corresponding female ports near the rear shoulders (see below). Note: Ensure the battery connectors are fully seated in the ports to avoid loose connections.

2	The aircraft will emit a series of beeps during the initialization sequence. The GPS status indicator displays as follows: Blue flashing: Waiting for GPS lock Green Flashing or Green and Red flashing: GPS Lock obtained, ready to fly, disarmed. Green solid: GPS lock obtained, armed. Red flashing: Error - See QGroundControl for error message details, or reboot the aircraft.
3	Navigation LEDs: There are four navigation LEDs on the aircraft: Front-left: Red (port) Front-right: Green (starboard) Rear: a white LED, on each rear motor

Powering Off the Aircraft

1	Disconnect the batteries by pulling on the connector, not the wires.
2	Power down the hand controller by holding the Power button in, then follow the on-screen prompts.